Central Heating Problems? Power Flushing Leeds

Central Heating Problems?

Then a Direct Heating Installations powerflush could be the answer.

Is the system slow to warm up?
Are some radiators completely or partialy cold?
Do radiators need frequent bleeding?
Radiators with pinhole perferations or leakage?
Are there kettling noises from the boiler?
Do you have repeated pump failures?

We use the Kamco CF90 powerflushing machine

Magnacleanse powerflushing unit

Sentinel chemical

Why have your heating system power flushed?

Cures flow and circulation problems.
Restores system efficiency.
Restores heat output to radiators.
Cleans the whole system, including underfloor pipework.
Reduces pump failure problems.
Removes aggressive water and treatment prevents further corrosion.
Cures or prevents boiler noise.
Power flushing and descaling in one visit.
Complete process carried out in less than six hours.*
More effective than traditional flushing methods.
Minimises boiler warranty problems.

* depending on system size.

After Care

After your power flush, we add sentinel x100 inhibitor to maintain the cleanliness of your system and reduce corrosion in the future. We also offer the Magnetic filtration device to prevent future build up.

Worcester Bosch greenstar filter https://www.worcester-bosch.co.uk/products/accessories/directory/greenstar-system-filter-22mm-28mm fitted by Worcester Bosch accredited installers.

WAI https://www.worcester-bosch.co.uk/installers/direct-heating-installations-2

Magna clean filter http://www.adey.com/installers/filters/magnaclean-professional

Why choose us

We have 5 star rating on Which trusted trader and Rated people.

View our rating

http://trustedtraders.which.co.uk/businesses/direct-heating-installations

Visual and written evidence of the condition of your existing system

A certificate once we are completed to prove the results we have achieved

Competitive prices

Central Heating Systems

Central Heating Systems corrode internally, when air is in the system, producing black iron oxide sludge deposits in radiators and other iron components. These particles stick to all surfaces, causing premature failure of pumps and valves, cold unbalanceable radiators, blocked boiler heat exchangers and hot water heating coils. Overall system efficiency is greatly reduced and fuel wasted.

Is your system noisy, radiators full of air and in need of bleeding all the time. Radiators take forever to warm up and most of the time never get warm all over?? Having the central heating pump replaced often and radiator valves are buzzing from time to time. Sounds like you need a power flush!!!

Power flushing is a highly effective cleansing operation which works by pumping water at a much higher velocity than usual through the heating system, to loosen and mobilise harmful corrosion deposits, and to suspend them in the rapidly moving water. The process is made more effective by specialist cleansing chemicals, an instantaneous flow reversal device which creates turbulence in the radiators to optimise 'pick up' of the debris, and a magnetic filter to clean the system water during the power flush.

Once loosened, the unwanted debris is purged from the system with clean water. At the end of the flushing process, the system contains fresh clean water, and reinstatement of the system to normal operation takes only a few minutes.

During the process, radiators are individually flushed, without removing or disconnecting them from the system, by directing the full output of the power flushing pump through each radiator separately.

The power flushing is not a high pressure operation, and it is suitable for most domestic wet central heating systems. It is carried out with minimal disturbance and disruption to the normal operation of the system, often without disconnecting the boiler or any radiators.